At a Glance: What Is UNILIFT AP12.40.04.A3
Product Type and Construction
Submersible drainage pump type. Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 3-phase totally enclosed motor in insulation class F. The pump is fitted with a suction strainer. The pump is supplied with a control box including motor starter, a motor protection and a float switch for automatic start/stop of the pump. The float switch contains 10 m cable. And there is a 0.8 m mains cable connected to the box (see electrical data for optional CEE plug). The impeller is a SEMI OPEN impeller for 12 mm free passage suitable for pumping groundwater, surface water, rain water and similar liquids. The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil. The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings. The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.
A3 (three-phase) vs A1 (single-phase); Four Models in This Batch
The A3 suffix denotes a three-phase 3 x 400 V version, supplied with a control box (containing motor starter and motor protection, plus a 0.8 m cable) and a level switch with its own 10 m cable for automatic start and stop. Built-in motor protection is NONE and thermal protection is external (provided by the control box); no run capacitor is listed in the datasheet. Do not confuse it with the A1 single-phase version. Across the four datasheets in this batch, 40.04 / 40.06 / 40.08 / 50.11 correspond to rated power P2 of 0.4 / 0.6 / 0.8 / 1.2 kW; the AP12.50.11.A3 has a maximum flow of 8.89 l/s, maximum head of 18 m and an Rp 2 inch connection, while the other three use Rp 1 1/2 inch.
Key Specifications (Product No. 96011025)
| Item | UNILIFT AP12.40.04.A3 |
|---|---|
| Product name | UNILIFT AP12.40.04.A3 |
| Product No. | 96011025 |
| EAN number | 5700390901646 |
| Maximum flow | 3.89 l/s |
| Maximum head | 10 m |
| Type of impeller | SEMI OPEN |
| Max. particle | 12 mm |
| Pump housing | Stainless steel (EN 1.4301 / AISI 304) |
| Impeller | Stainless steel (EN 1.4301 / AISI 304) |
| Cable union | Brass (CW602N / C35330) |
| Type / size of connection | Rp / 1 1/2 inch |
| Maximum installation depth | 7 m |
| Inst. dry/wet | D/S |
| Installation | H/V |
| Place of installation | Indoor/outdoor |
| Range of ambient temperature | 0..55 °C |
| Liquid temperature range | 0..55 °C |
| Selected liquid temperature | 20 °C |
| Density | 998.2 kg/m3 |
| Power input P1 | 0.7 kW |
| Rated power - P2 | 0.4 kW |
| Mains frequency | 50 Hz |
| Rated voltage | 3 x 400 V (three-phase) |
| Rated current | 1.2 A |
| Cos phi - power factor | 0.83 |
| Rated speed | 2800 rpm |
| Capacitor size - run | No run capacitor listed in datasheet (three-phase) |
| Enclosure class (IEC 34-5) | IP68 |
| Insulation class (IEC 85) | F |
| Built-in motor protection / thermal protection | NONE / external |
| Length of power cable / cable plug | 10 m / NONE |
| Level switch | A (with control box and float switch) |
| Net weight / gross weight | 12.7 kg / 13 kg |
| Danish VVS No. | 391314301 |
| Swedish RSK No. | 5885775 |
| Finnish LVI No. | 4822515 |
| Country of origin | HU |
| Custom tariff no. | 84137091.90 |
| Environmental approvals | WEEE |
| Approvals | CE, LGABG, EAC, TUVRHWID, MORO, UKCA, CNROHSEXP, SEPRO |
Note: The table lists only items explicitly given in the official Grundfos product datasheet. Fields not stated in the datasheet are omitted; nothing is fabricated or calculated.
Key Features and Benefits
1. Three-phase motor with control box supplied
The A3 version integrates a submersible three-phase totally enclosed motor (insulation class F) and is supplied with a control box containing the motor starter and motor protection plus a 0.8 m cable, together with a level switch (10 m cable) for automatic start and stop - a complete package for three-phase installations.
2. All-stainless-steel pump body
The pump housing and impeller are both stainless steel (EN 1.4301 / AISI 304) and the cable union is brass (CW602N / C35330), suitable for long-term submerged duty with surface water, groundwater and rain water.
3. Semi-open impeller with 12 mm free passage
The impeller is SEMI OPEN with 12 mm free passage, suitable for pumping groundwater, surface water, rain water and similar liquids.
4. IP68 for full submersion, indoor and outdoor use
Enclosure class IP68, maximum installation depth 7 m, suitable for indoor and outdoor installation. A cooling jacket provides continuous cooling of the motor by the pumped liquid, and long-life deep-groove greased-for-life ball bearings are used.
5. Double shaft seal and non-toxic oil chamber
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil. A carrying handle is fitted and a 10 m mains cable is supplied; glass sealing compound in the socket prevents penetration of humidity into the stator windings.
Applications and Selection Notes
- Sump and standing-water drainage: basements, garages, elevator shafts, building sumps and rainwater collection systems.
- Surface and groundwater pumping: yards, surface water, shallow groundwater and similar liquids, plus temporary construction-site drainage.
- Lightly particle-laden water: 12 mm free passage suits rain water, surface water and similar liquids containing small particles.
- Selection note: The four models differ in flow (maximum 3.89 ... 8.89 l/s) and head (maximum 10 ... 18 m), and in connection size (Rp 1 1/2 vs Rp 2). A3 is a three-phase 3 x 400 V package; confirm a three-phase supply on site and match the actual duty to the specification table above.