At a Glance: What Is UNILIFT AP50.50.11.A1V
Product Type and Construction
Submersible drainage pump type. Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection. The pump is fitted with suction strainer and level switch for automatic start and stop. The impeller is a VORTEX impeller for 50 mm free passage suitable for pumping groundwater, surface water, rain water and similar. The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil. The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings. The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.
UNILIFT AP50 Features and the Four Models in This Batch
UNILIFT AP50 is a range of stainless steel submersible drainage pumps using a VORTEX impeller with free passage of 35 mm (AP35) or 50 mm (AP50), considerably higher than the 12 mm semi-open impeller of the UNILIFT AP12 series. The four models in this batch - AP35.40.06, AP35.40.08, AP50.50.08 and AP50.50.11 - have rated power P2 of 0.6 / 0.7 / 0.8 / 1.1 kW; AP35 models use a 1 1/2 inch connection and AP50 models an Rp 2 inch connection. All are single-phase 1 x 230 V with PSC motors; flow, head, current, capacitor and weight differ between models, so check each parameter carefully when selecting.
Key Specifications (Product No. 96404186)
| Item | UNILIFT AP50.50.11.A1V |
|---|---|
| Product name | UNILIFT AP50.50.11.A1V |
| Product No. | 96404186 |
| EAN number | 5700390910440 |
| Maximum flow | 8.33 l/s |
| Maximum head | 12 m |
| Type of impeller | VORTEX |
| Max. particle | 50 mm |
| Pump housing | Stainless steel (EN 1.4301 / AISI 304) |
| Impeller | Stainless steel (EN 1.4301 / AISI 304) |
| Cable union | Brass (CW602N / C35330) |
| Type / size of connection | Rp / 2 inch |
| Maximum installation depth | 7 m |
| Inst. dry/wet | D/S |
| Installation | H/V |
| Place of installation | Indoor/outdoor |
| Range of ambient temperature | 0..55 °C |
| Liquid temperature range | 0..55 °C |
| Selected liquid temperature | 20 °C |
| Density | 998.2 kg/m3 |
| Power input P1 | 1.6 kW |
| Motor type, 1-phase | PSC |
| Rated power - P2 | 1.1 kW |
| Mains frequency | 50 Hz |
| Rated voltage | 1 x 230 V |
| Rated current | 8 A |
| Cos phi - power factor | 0.92 |
| Rated speed | 2800 rpm |
| Capacitor size - run | 20 μF / 400 V |
| Enclosure class (IEC 34-5) | IP68 |
| Insulation class (IEC 85) | F |
| Built-in motor protection / thermal protection | CONTACT / internal |
| Length of power cable / cable plug | 10 m / NONE |
| Level switch | A |
| Net weight / gross weight | 16.3 kg / 17.4 kg |
| Country of origin | HU |
| Custom tariff no. | 84137099.90 |
| Environmental approvals | WEEE |
| Approvals | CE, VDE, LGABG, EAC, TUVRHWID, MORO, UKCA, CNROHSEXP, SEPRO |
Note: The table lists only items explicitly given in the official Grundfos product datasheet. Fields not stated in the datasheet are omitted; nothing is fabricated or calculated.
Key Features and Benefits
1. VORTEX impeller with large free passage
The VORTEX impeller allows 50 mm free passage (35 mm for AP35, 50 mm for AP50), suitable for pumping surface water, groundwater and similar liquids containing relatively large particles, with low clogging risk.
2. All-stainless-steel pump body
The pump housing and impeller are both stainless steel (EN 1.4301 / AISI 304) and the cable union is brass (CW602N / C35330), suitable for long-term submerged duty.
3. Level switch for automatic start and stop
Fitted with a suction strainer and a level switch (A) for automatic start and stop, suitable for unattended drainage and sump applications.
4. IP68 for full submersion, indoor and outdoor use
Enclosure class IP68, maximum installation depth 7 m, suitable for indoor and outdoor installation. A cooling jacket provides continuous cooling of the motor by the pumped liquid, and long-life deep-groove greased-for-life ball bearings are used.
5. Double shaft seal and non-toxic oil chamber
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil. A carrying handle is fitted and a 10 m mains cable is supplied; glass sealing compound in the socket prevents penetration of humidity into the stator windings.
Applications and Selection Notes
- Surface and groundwater pumping: the datasheet states the pump is suitable for pumping surface water, groundwater and similar liquids, for yards, sumps and rainwater collection systems.
- Liquids with larger particles: the VORTEX impeller allows 50 mm free passage, suitable for similar liquids containing small to relatively large particles.
- Standing-water drainage: basements, garages, elevator shafts and temporary construction-site drainage.
- Selection note: The four models differ in flow (maximum 4.17 ... 8.33 l/s), head (maximum 9 ... 12 m), connection size and free passage. Refer to the specification table above and match the actual duty and installation conditions.