At a Glance: What Is UNILIFT AP50B.50.08.A1V
Product Type and Construction
Submersible effluent pump. Vertical single-stage stainless steel submersible pump with integrated submersible 1-phase motor. The pump is fitted with ring stand and carrying handle and is supplied with a 10 m mains cable and a level switch for automatic start and stop. The impeller is a VORTEX impeller for 50 mm free passage suitable for pumping surface water, groundwater, wastewater and similar. The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil. The motor is insulation class F with thermal overload protection and has long-life deep-groove greased-for-life ball bearings. The pump has an Rp 2 inch discharge port and is ready for installation either free-standing or on an auto-coupling system.
UNILIFT B Series Features and the Four Models in This Batch
The UNILIFT B series (AP35B / AP50B) comprises stainless steel submersible effluent pumps fitted with a ring stand and carrying handle, installable free-standing or on an auto-coupling system, using a VORTEX impeller (the Chinese datasheet uses varying terms such as "漩涡" and "滋润"; this article follows the VORTEX description). Compared with the non-B AP35/AP50, the B series has a liquid and ambient temperature range of 0..40 °C, a uniform Rp 2 inch connection, and is explicitly suitable for pumping wastewater. The four models in this batch - AP35B.50.06, AP35B.50.08, AP50B.50.08 and AP50B.50.11 - have rated power P2 of 0.66 / 0.71 / 0.74 / 1.21 kW, maximum flow of 5 / 5.83 / 6.67 / 7.78 l/s and maximum head of 11 / 13 / 11 / 14 m, with free passage of 35 mm for AP35B and 50 mm for AP50B. Country of origin and approvals differ between models; check each parameter carefully when selecting.
Key Specifications (Product No. 99972781)
| Item | UNILIFT AP50B.50.08.A1V |
|---|---|
| Product name | UNILIFT AP50B.50.08.A1V |
| Product No. | 99972781 |
| EAN number | 5715114957595 |
| Maximum flow | 6.67 l/s |
| Maximum head | 11 m |
| Type of impeller | VORTEX |
| Max. particle | 50 mm |
| Pump housing | Stainless steel (EN 1.4301 / AISI 304) |
| Impeller | Stainless steel (EN 1.4301 / AISI 304) |
| Type / size of connection | Rp / 2 inch |
| Maximum installation depth | 7 m |
| Inst. dry/wet | S |
| Installation | H/V |
| Auto-coupling | Y |
| Place of installation | Indoor/outdoor |
| Range of ambient temperature | 0..40 °C |
| Liquid temperature range | 0..40 °C |
| Selected liquid temperature | 20 °C |
| Density | 998.2 kg/m3 |
| Power input P1 | 1.2 kW |
| Motor type, 1-phase | PSC |
| Rated power - P2 | 0.74 kW |
| Mains frequency | 50 Hz |
| Rated voltage | 1 x 230 V |
| Rated current | 5.37 A |
| Cos phi - power factor | 0.97 |
| Rated speed | 2790 rpm |
| Capacitor size - run | 16 μF / 400 V |
| Enclosure class (IEC 34-5) | IP68 |
| Insulation class (IEC 85) | F |
| Built-in motor protection / thermal protection | CONTACT / internal |
| Length of power cable / cable plug | 10 m / NONE |
| Level switch | A |
| Net weight / gross weight | 11.6 kg / 12.9 kg |
| Sales region | China |
| Country of origin | CN |
| Custom tariff no. | 84137099.90 |
| Environmental approvals | WEEE |
| Approvals | CE, VDE, LGABG, EAC, MORO, UKCA, CNROHSEXP, SEPRO |
Note: The table lists only items explicitly given in the official Grundfos product datasheet. Fields not stated in the datasheet are omitted; nothing is fabricated or calculated.
Key Features and Benefits
1. Effluent pump design for wastewater applications
Designed as a submersible effluent pump with a ring stand and carrying handle, installable free-standing or on an auto-coupling system. The VORTEX impeller allows 50 mm free passage (35 mm for AP35B, 50 mm for AP50B), suitable for pumping surface water, groundwater, wastewater and similar liquids.
2. All-stainless-steel pump body
The pump housing and impeller are both stainless steel (EN 1.4301 / AISI 304), suitable for long-term submerged duty with wastewater.
3. Level switch for automatic start and stop
Supplied with a 10 m mains cable and a level switch (A) for automatic start and stop, suitable for unattended drainage and sump applications.
4. IP68 for full submersion, indoor and outdoor use
Enclosure class IP68, maximum installation depth 7 m, suitable for indoor and outdoor installation, with long-life deep-groove greased-for-life ball bearings.
5. Double shaft seal and non-toxic oil chamber
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil. The motor is insulation class F with thermal overload protection, and a carrying handle is fitted for easy movement and installation.
Applications and Selection Notes
- Wastewater and surface water pumping: the datasheet states the pump is suitable for pumping surface water, groundwater, wastewater and similar liquids, for sumps and building drainage.
- Liquids with larger particles: the VORTEX impeller allows 50 mm free passage (35 mm for AP35B, 50 mm for AP50B), suitable for similar liquids containing small to relatively large particles.
- Flexible installation: fitted with a ring stand and carrying handle, installable free-standing or via the auto-coupling system (Y), indoors or outdoors.
- Selection note: The four models differ in flow (maximum 5 ... 7.78 l/s), head (maximum 11 ... 14 m), country of origin, customs tariff number and approvals. Refer to the specification table above and match the actual duty and installation conditions.