Grundfos UNILIFT AP50B.50.15.A3V Stainless Steel Submersible Effluent Pump

UNILIFT AP50B A3V Three-phase Series | Product No. 92532144 | Single-model focus
Source: Grundfos UNILIFT AP50B.50.15.A3V Product Datasheet (Product No. 92532144)

At a Glance: What Is UNILIFT AP50B.50.15.A3V

Key facts: The Grundfos UNILIFT AP50B.50.15.A3V (Product No. 92532144) is a three-phase stainless steel submersible effluent pump of the UNILIFT AP50B series. Maximum flow 8.61 l/s, maximum head 17 m, rated power P2 1.5 kW. It is a 3 x 400 V model using a VORTEX impeller with 50 mm free passage and an Rp 2 inch connection, with a liquid temperature range of 0..40 °C and enclosure class IP68, supplied with a level switch for automatic start and stop. The pump housing and impeller are both stainless steel (EN 1.4301 / AISI 304). All parameters are taken verbatim from the official Grundfos product datasheet, with no fabrication or calculated values.
Maximum flow
8.61 l/s
Maximum head
17 m
Rated power P2
1.5 kW
Free passage
50 mm
Power supply
3 x 400 V
Enclosure
IP68

Product Type and Construction

Submersible effluent pump. Vertical single-stage stainless-steel submersible pump with integrated submersible 3-phase motor. The pump is fitted with ring stand and carrying handle and is supplied with a 10 m power cable and a level switch for automatic start and stop. The impeller is a VORTEX impeller for 50 mm free passage suitable for pumping surface water, groundwater, wastewater and similar. The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil. With class F motor insulation and long-life deep-groove greased-for-life ball bearings. The pump has an Rp-2 inch outlet port and is ready for installation either free-standing or on an auto-coupling system.

Positioning of the AP50B A3V Three-phase Model

UNILIFT AP50B is a range of stainless steel submersible effluent pumps fitted with a ring stand and carrying handle, installable free-standing or on an auto-coupling system, using a VORTEX impeller (the Chinese datasheet uses "漩涡/旋涡"; the English datasheet states VORTEX) with 50 mm free passage, suitable for pumping surface water, groundwater, wastewater and similar liquids. The A3V suffix denotes a three-phase 3 x 400 V version: no run capacitor is listed in the datasheet, built-in motor protection is NONE and thermal protection is external (provided by the control box), and it is supplied with a control box and a level switch with 10 m cable. The liquid and ambient temperature ranges are both 0..40 °C. Confirm a three-phase supply on site when selecting.

Key Specifications (Product No. 92532144)

ItemUNILIFT AP50B.50.15.A3V
Product nameUNILIFT AP50B.50.15.A3V
Product No.92532144
EAN number5715115836066
Maximum flow8.61 l/s
Maximum head17 m
Type of impellerVORTEX
Max. particle50 mm
Pump housingStainless steel (EN 1.4301 / AISI 304)
ImpellerStainless steel (EN 1.4301 / AISI 304)
Type / size of connectionRp / 2 inch
Maximum installation depth7 m
Inst. dry/wetS
InstallationH/V
Auto-couplingY
Place of installationIndoor/outdoor
Range of ambient temperature0..40 °C
Liquid temperature range0..40 °C
Selected liquid temperature20 °C
Density998.2 kg/m3
Power input P12.15 kW
Rated power - P21.5 kW
Mains frequency50 Hz
Rated voltage3 x 400 V (three-phase)
Rated current3.7 A
Cos phi - power factor0.85
Rated speed2785 rpm
Capacitor size - runNo run capacitor listed in datasheet (three-phase)
Enclosure class (IEC 34-5)IP68
Insulation class (IEC 85)F
Built-in motor protection / thermal protectionNONE / external
Length of power cable / cable plug10 m / NONE
Level switchA
Net weight / gross weight13.7 kg / 14.3 kg
Sales regionChina
Country of originCN
Custom tariff no.84139100.00
Environmental approvalsWEEE
ApprovalsCE, LGABG, EAC, MORO, UKCA, CNROHSEXP, SEPRO

Note: The table lists only items explicitly given in the official Grundfos product datasheet. Fields not stated in the datasheet are marked as "not listed in datasheet"; nothing is fabricated or calculated.

Key Features and Benefits

1. Three-phase motor with control package

Integrates a submersible three-phase totally enclosed motor (insulation class F) and is supplied with a control box (motor starter and motor protection) and a level switch with 10 m cable for automatic start and stop. Built-in motor protection is NONE and thermal protection is external, suitable for three-phase installations.

2. VORTEX impeller with 50 mm free passage

The VORTEX impeller allows 50 mm free passage, suitable for pumping surface water, groundwater, wastewater and similar liquids, with low clogging risk.

3. All-stainless-steel pump body

The pump housing and impeller are both stainless steel (EN 1.4301 / AISI 304), suitable for long-term submerged duty with wastewater; a ring stand and carrying handle are fitted for easy movement and installation.

4. IP68 with flexible installation

Enclosure class IP68, maximum installation depth 7 m, suitable for indoor and outdoor installation, free-standing or on an auto-coupling system (Y), with long-life deep-groove greased-for-life ball bearings.

5. Double shaft seal and non-toxic oil chamber

The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil, and a 10 m power cable is supplied with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.

Applications and Selection Notes

  • Wastewater and surface water pumping: the datasheet states the pump is suitable for pumping surface water, groundwater, wastewater and similar liquids, for sumps and building drainage.
  • Liquids with larger particles: the VORTEX impeller allows 50 mm free passage, suitable for similar liquids containing small to relatively large particles.
  • Flexible installation: fitted with a ring stand and carrying handle, installable free-standing or via the auto-coupling system (Y), indoors or outdoors.
  • Selection note: This model has a maximum flow of 8.61 l/s and a maximum head of 17 m and is a three-phase 3 x 400 V model; confirm a three-phase supply on site and match the actual duty to the specification table above.

Frequently Asked Questions

Q1: What type of pump is the UNILIFT AP50B.50.15.A3V?
A: It is a vertical single-stage three-phase stainless steel submersible effluent pump of the UNILIFT AP50B series from Grundfos, with a vertical discharge port and an integrated submersible three-phase totally enclosed motor (insulation class F). Enclosure class IP68 allows full submersion; the pump housing and impeller are both stainless steel (EN 1.4301 / AISI 304), it uses a VORTEX impeller with 50 mm free passage and is fitted with a ring stand, carrying handle and control box, suitable for pumping surface water, groundwater, wastewater and similar liquids.
Q2: What does the A3V suffix mean?
A: A3V denotes a three-phase 3 x 400 V version. No run capacitor is listed in the datasheet; built-in motor protection is NONE and thermal protection is external (provided by the control box), and it is supplied with a control box and a level switch with a 10 m cable for automatic start and stop. Confirm a three-phase supply on site; do not interpret it as a single-phase model.
Q3: What are the key performance figures of this model?
A: Maximum flow 8.61 l/s, maximum head 17 m, rated power P2 1.5 kW, power input P1 2.15 kW; three-phase 3 x 400 V, rated current 3.7 A, power factor 0.85, rated speed 2785 rpm; 50 mm free passage and an Rp 2 inch connection.
Q4: What are the liquid and ambient temperature ranges and installation depth?
A: The liquid temperature range and ambient temperature range are both 0..40 °C, with selected liquid temperature 20 °C and density 998.2 kg/m3. Maximum installation depth is 7 m; indoor and outdoor installation is permitted, free-standing or with the auto-coupling system (Y).
Q5: What should be noted regarding electrical installation?
A: This model is three-phase 3 x 400 V / 50 Hz, with built-in motor protection NONE and thermal protection external, with protection provided by the supplied control box. The pump has a 10 m power cable but no plug (NONE); wiring must be carried out by a qualified person and a three-phase supply must be available on site.
Source statement: The technical parameters and product information in this article are taken from the official Grundfos product datasheet for UNILIFT AP50B.50.15.A3V (Product No. 92532144). Parameters (flow, head, power, materials, impeller type, free passage, connection, electrical data, approvals, etc.) follow that official datasheet. For final selection, installation and purchasing, always refer to the latest official Grundfos technical documentation and the actual operating conditions.

需要选型或采购「格兰富」水泵?欢迎联系

电话 15655120770
或邮件:pengry@qq.com(工作日快速回复)