Grundfos UNILIFT APG.40.10.1 Multifunctional Grinder Pump

UNILIFT APG Series | Product No. 92700282 | Single-model focus
Source: Grundfos UNILIFT APG.40.10.1 Product Datasheet (Product No. 92700282)

At a Glance: What Is UNILIFT APG.40.10.1

Key facts: The Grundfos UNILIFT APG.40.10.1 (Product No. 92700282) is a single-stage submersible multifunctional grinder pump of the UNILIFT APG series, designed for pumping domestic wastewater. Rated flow 2 l/s, rated head 15 m, rated power P2 1 kW. It is equipped with a grinder system that grinds destructible solids into small pieces to be led through pipes with a relatively small diameter. The pump housing is cast iron (EN 1561 EN-GJL-200), the impeller is composite (PPE-PS-GF30) and the motor house is stainless steel (EN 1.4301 / AISI 304), with enclosure class IP68. Power supply is 单相 1×230 V, and the parameter table lists the float switch as N (none). All parameters are taken verbatim from the official Grundfos product datasheet, with no fabrication or calculated values.
Rated flow
2 l/s
Rated head
15 m
Rated power P2
1 kW
Impeller type
Grinder
Float switch
N (none)
Enclosure
IP68

Product Type and Construction

The UNILIFT APG pump is a single-stage submersible pump designed for pumping domestic wastewater. The pump is equipped with a grinder system that grinds destructible solids into small pieces to lead them through pipes with a relatively small diameter. UNILIFT APG pumps are ideal for use in sparsely populated areas, where gravity sewage systems are not available. The solution is ideal in, for example, one-family or two-family houses, residential building services and areas with large terrain-level differences. For residential building services and light commercial applications, we recommend using the three-phase version of the product. The pump is available for two types of installation: submerged installation on auto-coupling system; submerged installation, free-standing. The pump is made of wear-resistant materials such as cast iron and stainless steel. These materials ensure reliable operation. The surface of the pump is smooth to prevent dirt and impurities from stacking. Four corrosion-resistant screws secure the motor to the pump housing and allow for easy service of the pump.

Suffix .1 / .3 and the Float Switch

The .1 suffix denotes single-phase 1 x 230 V and .3 three-phase 3 x 400 V; both share the same rated flow and head (2 l/s, 15 m) but differ in input power, current and shipping volume. Note: the parameter tables of both models in this batch list the float switch as N (none), meaning no float switch is supplied and start/stop requires external control. The datasheet's descriptive text mentions a level switch, but the Controls table states N; this discrepancy is reported as-is and the parameter table is followed. Do not confuse these models with the A1/A3 versions.

Key Specifications (Product No. 92700282)

ItemUNILIFT APG.40.10.1
Product nameUNILIFT APG.40.10.1
Product No.92700282
EAN number5715118340850
Rated flow2 l/s
Rated head15 m
Type of impellerGrinder system
ApprovalsCE, CN ROHS EXE
ModelA
Pump housingCast iron (EN 1561 EN-GJL-200)
ImpellerComposite (PPE-PS-GF30)
Motor houseStainless steel (EN 1.4301 / AISI 304)
Range of ambient temperature0..40 °C
Type of outlet connectionDIN / Rp
Size of outlet connectionDN 32/40 (1 1/2 inch)
Pressure rating for connectionPN 10
Maximum installation depth7 m
Auto coupling96076063
Liquid temperature range0..70 °C
Selected liquid temperature20 °C
Density998.2 kg/m3
Power input P11.3 kW
Rated power - P21 kW
Mains frequency50 Hz
Rated voltage1×230 V
Rated current5.8 A
Rated speed2850 rpm
Enclosure class (IEC 34-5)IP68
Insulation class (IEC 85)F
Length of power cable10 m
Power plugNo plug
Float switch (Yes/No)N (none)
Net weight / gross weight23.2 kg / 24.8 kg
Shipping volume0.036 m3
Sales regionChina
Country of originHU
Custom tariff no.84139100.00
Environmental approvalsWEEE

Note: The table lists only items explicitly given in the official Grundfos product datasheet. The datasheet's descriptive text and parameter table differ regarding the float switch; the parameter table (N) is reported as-is. Nothing is fabricated or calculated.

Key Features and Benefits

1. Grinder system for small-bore discharge

Equipped with a grinder system that grinds destructible solids into small pieces to be led through pipes with a relatively small diameter, ideal for domestic wastewater.

2. Wear-resistant materials, easy service

The pump housing is cast iron (EN 1561 EN-GJL-200), the impeller is composite (PPE-PS-GF30) and the motor house is stainless steel (EN 1.4301 / AISI 304). The smooth surface prevents dirt and impurities from stacking, and four corrosion-resistant screws secure the motor to the pump housing for easy service.

3. No float switch - external control required

The parameter table lists the float switch as N (none), so no float switch is supplied and start/stop requires external control. Installable submerged on an auto-coupling system or free-standing, with a 10 m power cable supplied.

4. IP68 with wide liquid temperature range

Enclosure class IP68, maximum installation depth 7 m, liquid temperature range 0..70 °C, ambient temperature range 0..40 °C and insulation class F.

Applications and Selection Notes

  • Domestic wastewater pumping: the datasheet states the pump is designed for pumping domestic wastewater, ideal for sparsely populated areas where gravity sewage systems are not available.
  • Residential and light commercial: ideal for one-family or two-family houses and residential building services; for residential building services and light commercial applications, the three-phase version is recommended.
  • Large terrain-level differences: suitable for areas with large terrain-level differences, using grinding and pressure discharge to overcome gravity sewage limitations.
  • Selection note: These models have a float switch rating of N (none), so external level control is required. The .1 and .3 versions share the same rated flow and head but differ in power supply, current and input power; confirm the on-site supply and match the actual duty to the specification table above.

Frequently Asked Questions

Q1: What type of pump is the UNILIFT APG?
A: The UNILIFT APG is a single-stage submersible multifunctional grinder pump from Grundfos, designed for pumping domestic wastewater and equipped with a grinder system that grinds destructible solids into small pieces for discharge through smaller-diameter pipes. It has a cast iron housing, composite impeller and stainless steel motor house, with enclosure class IP68.
Q2: How do the .1 and .3 suffixes differ, and are they the same as A1/A3?
A: .1 is single-phase 1 x 230 V and .3 is three-phase 3 x 400 V; both share the same rated flow and head (2 l/s / 15 m) and rated power P2 of 1 kW, but differ in input power, current and shipping volume (.1: P1 1.3 kW / 5.8 A / 0.036 m3; .3: P1 1.15 kW / 2.8 A / 0.042 m3). These models differ from the A1/A3 versions: the float switch is N (none) and the customs tariff number is 84139100.00 - do not confuse them.
Q3: Does this pump have a float switch, and is it all stainless steel?
A: The parameter table lists the float switch as N (none), so no float switch is supplied and start/stop requires external control (the datasheet's descriptive text mentions a level switch, but the parameter table states N - reported as-is). Materials are a cast iron housing (EN 1561 EN-GJL-200), composite impeller (PPE-PS-GF30) and stainless steel motor house (EN 1.4301 / AISI 304) - not an all-stainless-steel pump.
Q4: What are the liquid and ambient temperature ranges and installation options?
A: The liquid temperature range is 0..70 °C and the ambient temperature range is 0..40 °C, with selected liquid temperature 20 °C and density 998.2 kg/m3. Maximum installation depth is 7 m; it can be installed submerged on an auto-coupling system or free-standing.
Q5: What are the outlet size and pressure rating?
A: The outlet connection type is DIN / Rp, size DN 32/40 (1 1/2 inch) with a pressure rating of PN 10; the auto coupling number is 96076063, and a 10 m power cable is supplied with no plug.
Source statement: The technical parameters and product information in this article are taken from the official Grundfos product datasheet for UNILIFT APG.40.10.1 (Product No. 92700282). Parameters (flow, head, power, materials, impeller type, connection, electrical data, approvals, etc.) follow that official datasheet. For final selection, installation and purchasing, always refer to the latest official Grundfos technical documentation and the actual operating conditions.

需要选型或采购「格兰富」水泵?欢迎联系

电话 15655120770
或邮件:pengry@qq.com(工作日快速回复)