Grundfos UNILIFT APG.40.10.A3 Multifunctional Grinder Pump

UNILIFT APG Series | Product No. 92700284 | Single-model focus
Source: Grundfos UNILIFT APG.40.10.A3 Product Datasheet (Product No. 92700284)

At a Glance: What Is UNILIFT APG.40.10.A3

Key facts: The Grundfos UNILIFT APG.40.10.A3 (Product No. 92700284) is a single-stage submersible multifunctional grinder pump of the UNILIFT APG series, designed for pumping domestic wastewater. Rated flow 2 l/s, rated head 15 m, rated power P2 1 kW. It is equipped with a grinder system that grinds destructible solids into small pieces to be led through pipes with a relatively small diameter. The pump housing is cast iron (EN 1561 EN-GJL-200), the impeller is composite (PPE-PS-GF30) and the motor house is stainless steel (EN 1.4301 / AISI 304), with enclosure class IP68. Power supply is 三相 3×400 V. All parameters are taken verbatim from the official Grundfos product datasheet, with no fabrication or calculated values.
Rated flow
2 l/s
Rated head
15 m
Rated power P2
1 kW
Impeller type
Grinder
Outlet size
DN32/40
Enclosure
IP68

Product Type and Construction

The UNILIFT APG pump is a single-stage submersible pump designed for pumping domestic wastewater. The pump is equipped with a grinder system that grinds destructible solids into small pieces to lead them through pipes with a relatively small diameter. UNILIFT APG pumps are ideal for use in sparsely populated areas, where gravity sewage systems are not available. The solution is ideal in, for example, one-family or two-family houses, residential building services and areas with large terrain-level differences. For residential building services and light commercial applications, we recommend using the three-phase version of the product. The pump is available for two types of installation: submerged installation on auto-coupling system; submerged installation, free-standing. The pump is made of wear-resistant materials such as cast iron and stainless steel. These materials ensure reliable operation. The surface of the pump is smooth to prevent dirt and impurities from stacking. Four corrosion-resistant screws secure the motor to the pump housing and allow for easy service of the pump.

How the APG Series Differs from AP / AP35 / AP50

UNILIFT APG is a single-stage submersible pump with a grinder system that grinds solids into small pieces for discharge through smaller-diameter pipes, ideal for areas without gravity sewage systems. UNILIFT AP / AP35 / AP50 are submersible drainage/effluent pumps without a grinder. The materials also differ: the APG has a cast iron pump housing, composite impeller and stainless steel motor house - it should not be mistaken for an all-stainless-steel pump. The A1 suffix denotes single-phase 1 x 230 V and A3 three-phase 3 x 400 V; both share the same rated flow and head (2 l/s, 15 m) but differ in input power, current and shipping volume.

Key Specifications (Product No. 92700284)

ItemUNILIFT APG.40.10.A3
Product nameUNILIFT APG.40.10.A3
Product No.92700284
EAN number5715118340898
Rated flow2 l/s
Rated head15 m
Type of impellerGrinder system
ApprovalsCE, CN ROHS EXE
ModelA
Pump housingCast iron (EN 1561 EN-GJL-200)
ImpellerComposite (PPE-PS-GF30)
Motor houseStainless steel (EN 1.4301 / AISI 304)
Range of ambient temperature0..40 °C
Type of outlet connectionDIN / Rp
Size of outlet connectionDN 32/40 (1 1/2 inch)
Pressure rating for connectionPN 10
Maximum installation depth7 m
Auto coupling96076063
Liquid temperature range0..70 °C
Selected liquid temperature20 °C
Density998.2 kg/m3
Power input P11.15 kW
Rated power - P21 kW
Mains frequency50 Hz
Rated voltage3×400 V
Rated current2.8 A
Rated speed2850 rpm
Enclosure class (IEC 34-5)IP68
Insulation class (IEC 85)F
Length of power cable10 m
Power plugNo plug
Float switch (Yes/No)Y
Net weight / gross weight23.2 kg / 24.8 kg
Shipping volume0.042 m3
Sales regionChina
Country of originHU
Custom tariff no.84137091.90
Environmental approvalsWEEE

Note: The table lists only items explicitly given in the official Grundfos product datasheet. Fields not stated in the datasheet are omitted; nothing is fabricated or calculated.

Key Features and Benefits

1. Grinder system for small-bottle discharge

Equipped with a grinder system that grinds destructible solids into small pieces to be led through pipes with a relatively small diameter, ideal for domestic wastewater.

2. Wear-resistant materials, easy service

The pump housing is cast iron (EN 1561 EN-GJL-200), the impeller is composite (PPE-PS-GF30) and the motor house is stainless steel (EN 1.4301 / AISI 304). The smooth surface prevents dirt and impurities from stacking, and four corrosion-resistant screws secure the motor to the pump housing for easy service.

3. Two installation options

Available for submerged installation on an auto-coupling system or free-standing submerged installation, with a float switch (Y) for automatic start and stop and a 10 m power cable supplied.

4. IP68 with wide liquid temperature range

Enclosure class IP68, maximum installation depth 7 m, liquid temperature range 0..70 °C, ambient temperature range 0..40 °C and insulation class F.

Applications and Selection Notes

  • Domestic wastewater pumping: the datasheet states the pump is designed for pumping domestic wastewater, ideal for sparsely populated areas where gravity sewage systems are not available.
  • Residential and light commercial: ideal for one-family or two-family houses and residential building services; for residential building services and light commercial applications, the three-phase version is recommended.
  • Large terrain-level differences: suitable for areas with large terrain-level differences, using grinding and pressure discharge to overcome gravity sewage limitations.
  • Selection note: A1 and A3 share the same rated flow and head but differ in power supply, current and input power; confirm the on-site supply and match the actual duty to the specification table above.

Frequently Asked Questions

Q1: What type of pump is the UNILIFT APG?
A: The UNILIFT APG is a single-stage submersible multifunctional grinder pump from Grundfos, designed for pumping domestic wastewater and equipped with a grinder system that grinds destructible solids into small pieces for discharge through smaller-diameter pipes. It has a cast iron housing, composite impeller and stainless steel motor house, with enclosure class IP68.
Q2: How do the A1 and A3 versions differ?
A: Both share the same rated flow and head (2 l/s / 15 m) and rated power P2 of 1 kW, but A1 is single-phase 1 x 230 V (5.8 A, P1 1.3 kW, shipping volume 0.036 m3) while A3 is three-phase 3 x 400 V (2.8 A, P1 1.15 kW, shipping volume 0.042 m3). For residential building services and light commercial applications, the three-phase version is recommended.
Q3: Is this pump made entirely of stainless steel?
A: No. The APG has a cast iron pump housing (EN 1561 EN-GJL-200), a composite impeller (PPE-PS-GF30) and a stainless steel motor house (EN 1.4301 / AISI 304) - a wear-resistant material combination. It should not be mistaken for an all-stainless-steel pump.
Q4: What are the liquid and ambient temperature ranges and installation options?
A: The liquid temperature range is 0..70 °C and the ambient temperature range is 0..40 °C, with selected liquid temperature 20 °C and density 998.2 kg/m3. Maximum installation depth is 7 m; it can be installed submerged on an auto-coupling system or free-standing.
Q5: What are the outlet size and pressure rating?
A: The outlet connection type is DIN / Rp, size DN 32/40 (1 1/2 inch) with a pressure rating of PN 10; the auto coupling number is 96076063, and a 10 m power cable is supplied with no plug.
Source statement: The technical parameters and product information in this article are taken from the official Grundfos product datasheet for UNILIFT APG.40.10.A3 (Product No. 92700284). Parameters (flow, head, power, materials, impeller type, connection, electrical data, approvals, etc.) follow that official datasheet. For final selection, installation and purchasing, always refer to the latest official Grundfos technical documentation and the actual operating conditions.

需要选型或采购「格兰富」水泵?欢迎联系

电话 15655120770
或邮件:pengry@qq.com(工作日快速回复)