Grundfos COMFORT 15-14 B High-Efficiency DHW Circulator

COMFORT Basic Model | Product No. 98485504 | Single Product Focus
Source: Grundfos 98485504 COMFORT 15-14 B Product Datasheet

Key Conclusion: What Is COMFORT 15-14 B

Bottom line:Grundfos COMFORT 15-14 B (Product No. 98485504, EAN 5711495936297) is a basic, high-efficiency domestic hot-water circulator designed for hot-water recirculation in residential buildings with a dedicated return line. It is compatible with all types of water heater tanks, tankless systems, solar or heat pumps. Rated flow 0.45 m³/h, rated head 0.9 m, maximum head 14 dm, with a maximum power input of only 7 W. It features continuous 24/7 operation, suitable for external control via plug-in timer, gas boiler or heat-pump controller; the datasheet lists the operation mode as "None" (no built-in smart control). The pump housing is drinking-water-approved brass; country of origin DE. All parameters are taken verbatim from the official Grundfos product datasheet, without any fabrication or inference.
Rated flow
0.45 m³/h
Rated head
0.9 m
Max head
14 dm
Max power input
7 W
Operation mode
None
Operation
24/7 continuous

Product Positioning and Control

COMFORT is an efficient circulator designed for hot-water recirculation in residential buildings with a dedicated return line. It is compatible with all types of water heater tanks, tankless systems, solar or heat pumps, whether or not the system has mixing or tampering valves installed. The pump features a compact housing and a permanent magnet with an integrated control unit. The spherical rotor, equipped with an impeller, is supported by a robust single-bearing ball system. The drinking-water-approved brass pump housing guarantees safety and reliability.

Continuous 24/7 Operation and External Control

COMFORT features the continuous 24/7 operation mode, suitable for external control via plug-in timer, gas boiler or heat-pump controller. The datasheet lists "Operation mode include: None" — this model has no built-in smart control mode (unlike variants with AUTOADAPT, temperature or timer control); flexible scheduling is achieved by external devices.

Variant and Optional Accessories

The BX variant includes non-return and shut-off valves, reducing installation cost. Optional: a venting flange (simple venting/draining without an additional permanent venting valve), fittings for pipe connections of different sizes and types, and non-return and shut-off valves.

Key Specifications (Product No. 98485504)

ItemCOMFORT 15-14 B
Product nameCOMFORT 15-14 B
Product No.98485504
EAN number5711495936297
Speed no.1
Rated flow0.45 m³/h
Rated head0.9 m
Maximum head14 dm
TF class95
ApprovalsVDE, CN_ROHS
Pump housingBrass (CuZn39Pb3, MS58)
ImpellerComposite (PPO-GF20 / Stainless steel)
Minimum ambient temperature0 °C
Maximum operating pressure10 bar
Pipe connection standardISO 228-1
Type of connectionRp
Size of connection1/2 inch
Pressure rating for connectionPN 10
Port-to-port length80 mm
Pumped liquidWater
Liquid temperature range2 .. 95 °C
Selected liquid temperature20 °C
Density998.2 kg/m³
Max. power input7 W
Mains frequency50/60 Hz
Rated voltage1 x 230 V
Current in speed 30.07 A
Enclosure class (IEC 34-5)IP44
Insulation class (IEC 85)F
Built-in motor protectionELECT.
Thermal protectionImpedance protected
Operation mode included (datasheet table)None (24/7 continuous, see text)
Net weight / Gross weight0.94 kg / 1.24 kg
Shipping volume0.003 m³
Sales regionChina
Country of originDE
Custom tariff no.84137099.90

Note: Only items explicitly given in the official datasheet are listed. The datasheet table lists "None" under operation modes; continuous 24/7 operation and external control are described in the description text and presented accordingly. No values have been fabricated or inferred.

Key Features and Benefits

① Continuous 24/7 operation with external control

The basic COMFORT operates continuously, 24/7, and is suitable for external control via plug-in timer, gas boiler or heat-pump controller; low power consumption and silent operation.

② Drinking-water-approved brass housing

Approved for drinking water: brass pump housing (CuZn39Pb3, MS58), stainless-steel rotor and composite impeller (PPO-GF20). Removing the pump head makes it easy to remove limescale and foreign deposits, meeting unlimited water hardness requirements.

③ Dry-running protection and multiple installation positions

Dry-running protection prevents failure if the system runs out of water. Multiple installation positions are supported, even with the pump head pointing downwards. The pump head fits brass housings of old and new pumps of the same design, including different manufacturers (Wilo, Vortex, Lowara, DAB, etc.).

④ Easy electrical installation and insulation

A pre-assembled power plug with a 1.5 m cable and double insulation protection eliminates the need for a ground wire. Insulating shells reduce heat loss, and the pump complies with pipe manufacturers' flow velocity limits (DN 15, DN 20 PEX, copper, etc.).

Applications and Selection Tips

  • Residential hot-water recirculation: For residential buildings with a dedicated return line, single- and multi-family homes; Q-H performance is designed around duty points compensating for heat loss in a specific pipe layout.
  • Multiple heat sources: Compatible with all types of water heater tanks, tankless systems, solar or heat pumps, with or without mixing or tampering valves.
  • Selection tips: This model has "None" as its operation mode (24/7 continuous) — choose a suffixed variant if AUTOADAPT, temperature or timer control is required. Check against rated flow 0.45 m³/h, rated head 0.9 m, maximum head 14 dm; confirm 1 x 230 V / 50-60 Hz and Rp 1/2 inch connection (port-to-port 80 mm, PN 10); liquid temperature 2 .. 95 °C and maximum operating pressure 10 bar.

FAQ

Q1: What type of pump is COMFORT 15-14 B?
A: It is a Grundfos COMFORT series basic high-efficiency DHW circulator (Product No. 98485504), designed for hot-water recirculation in residential buildings with a dedicated return line, compatible with water heater tanks, tankless systems, solar and heat pumps, with a drinking-water-approved brass housing.
Q2: What are the flow, head and power figures?
A: Rated flow 0.45 m³/h, rated head 0.9 m, maximum head 14 dm (the datasheet states the unit as decimeters). Maximum power input is only 7 W, speed no. 1.
Q3: What control modes does it have? Can it be timed or temperature-controlled?
A: The datasheet lists the operation mode as "None"; the pump runs continuously 24/7 and is suitable for external control via plug-in timer, gas boiler or heat-pump controller. For built-in AUTOADAPT, temperature or timer+temperature control, choose the respective suffixed variants. Description text and datasheet table are presented as-is.
Q4: What about materials, liquid temperature and protection?
A: Brass pump housing (CuZn39Pb3, MS58) and composite impeller (PPO-GF20 / stainless steel); pumped liquid is water, liquid temperature range 2 .. 95 °C (selected 20 °C, density 998.2 kg/m³); enclosure class IP44, insulation class F, maximum operating pressure 10 bar.
Q5: What are the connection size, weight and origin?
A: Pipe connection standard ISO 228-1, connection type Rp, size 1/2 inch, pressure rating PN 10, port-to-port length 80 mm; net weight 0.94 kg, gross weight 1.24 kg, shipping volume 0.003 m³; sales region China, country of origin DE, custom tariff no. 84137099.90.
Source statement:Technical parameters and product information are taken from the official Grundfos English product datasheet for COMFORT 15-14 B (Product No. 98485504). All parameters follow that datasheet; for selection, installation and purchase, please refer to the latest official Grundfos technical documentation and actual operating conditions.

需要选型或采购「格兰富」水泵?欢迎联系

电话 15655120770
或邮件:pengry@qq.com(工作日快速回复)