Grundfos COMFORT 15-14 B TA Adaptive High-Efficiency DHW Circulator

COMFORT TA Series | Product No. 98485557 | Single Product Focus
Source: Grundfos 98485557 COMFORT 15-14 B TA Product Datasheet

Key Conclusion: What Is COMFORT 15-14 B TA

Bottom line:Grundfos COMFORT 15-14 B TA (Product No. 98485557, EAN 5711495937171) is an adaptive, high-efficiency circulator designed for hot-water recirculation in residential buildings with a dedicated return line. It is compatible with all types of water heater tanks, tankless systems, solar or heat pumps. Rated flow 0.45 m³/h, rated head 0.9 m, maximum head 14 dm, with a maximum power input of only 7 W. It features three control modes: AUTOADAPT, temperature and continuous 24/7, and reduces heat loss by 67% compared to a continuously running pump. The pump housing is drinking-water-approved brass; country of origin DE. All parameters are taken verbatim from the official Grundfos product datasheet, without any fabrication or inference.
Rated flow
0.45 m³/h
Rated head
0.9 m
Max head
14 dm
Max power input
7 W
Control modes
3
Heat loss reduction
67%

Product Positioning and Operating Principle

COMFORT TA is an efficient circulator designed for hot-water recirculation in residential buildings with a dedicated return line. It is compatible with all types of water heater tanks, tankless systems, solar or heat pumps, whether or not the system has mixing or tampering valves installed. The pump features a compact housing and a permanent magnet with an integrated control unit. The spherical rotor, equipped with an impeller, is supported by a robust single-bearing ball system. The drinking-water-approved brass pump housing guarantees safety and reliability, and a built-in temperature sensor maintains water temperature. The user-friendly interface features LEDs and pushbuttons on the operating panel for displaying and setting operating times and control modes.

Three Control Modes

① AUTOADAPT: The pump quickly learns usage patterns throughout the day and, via an external sensor on the supply pipe, ensures hot water is available only when needed. It differentiates between mornings, evenings, weekdays, weekends and periods of inactivity such as vacations. After 24 hours with no hot-water usage detected, the pump enters vacation mode automatically and resumes when hot water is demanded again. For the first two weeks after installation, temperature control causes frequent starts to ensure immediate comfort until the usage pattern is learned. Once a week the pump runs a 15-minute disinfection (anti-legionella) cycle; the water heater must enable this function once a week.
② Temperature control: Combines external and internal sensors for more accurate water temperature measurement and activates the pump when the temperature drops below a certain level. On/off temperatures are automatically adjusted based on the maximum temperature measured in the system, with automatic vacation mode for energy efficiency — ideal for vacation homes.
③ Continuous 24/7: The pump operates continuously, 24 hours a day.

Variant and Optional Accessories

The BX variant includes non-return and shut-off valves, reducing installation cost. Optional: a venting flange (simple venting/draining without an additional permanent venting valve), fittings for pipe connections of different sizes and types, and non-return and shut-off valves.

Key Specifications (Product No. 98485557)

ItemCOMFORT 15-14 B TA
Product nameCOMFORT 15-14 B TA
Product No.98485557
EAN number5711495937171
Speed no.1
Rated flow0.45 m³/h
Rated head0.9 m
Maximum head14 dm
TF class95
ApprovalsVDE, CN_ROHS
Pump housingBrass (CuZn39Pb3, MS58)
ImpellerComposite (PPO-GF20 / Stainless steel)
Minimum ambient temperature0 °C
Maximum operating pressure10 bar
Pipe connection standardISO 228-1
Type of connectionRp
Size of connection1/2 inch
Pressure rating for connectionPN 10
Port-to-port length80 mm
Pumped liquidWater
Liquid temperature range2 .. 95 °C
Selected liquid temperature20 °C
Density998.2 kg/m³
Max. power input7 W
Mains frequency50/60 Hz
Rated voltage1 x 230 V
Current in speed 30.07 A
Enclosure class (IEC 34-5)IP44
Insulation class (IEC 85)F
Built-in motor protectionELECT.
Thermal protectionImpedance protected
Operation mode included (datasheet table)Temperature (AUTOADAPT and 24/7 per description text)
Net weight / Gross weight1.14 kg / 1.24 kg
Shipping volume0.003 m³
Sales regionChina
Country of originDE
Custom tariff no.84137099.90

Note: Only items explicitly given in the official Grundfos datasheet are listed. The datasheet table lists only "Temperature" under operation modes; AUTOADAPT and 24/7 are described in the description text and are presented here accordingly. No values have been fabricated or inferred.

Key Features and Benefits

① AUTOADAPT with 67% heat loss reduction

The pump learns daily usage patterns and delivers hot water only when needed; compared to continuously running pumps, heat loss is reduced by 67%, with low power consumption and silent operation.

② Drinking-water-approved brass housing

Approved for drinking water: brass pump housing (CuZn39Pb3, MS58), stainless-steel rotor and composite impeller (PPO-GF20). Removing the pump head makes it easy to remove limescale and foreign deposits, meeting unlimited water hardness requirements.

③ Dry-running protection and multiple installation positions

Dry-running protection prevents failure if the system runs out of water. Multiple installation positions are supported, even with the pump head pointing downwards. The pump head fits brass housings of old and new pumps of the same design, including different manufacturers (Wilo, Vortex, Lowara, DAB, etc.).

④ Easy electrical installation and insulation

A pre-assembled power plug with a 1.5 m cable and double insulation protection eliminates the need for a ground wire. Insulating shells reduce heat loss, and the pump complies with pipe manufacturers' flow velocity limits (DN 15, DN 20 PEX, copper, etc.).

Applications and Selection Tips

  • Residential hot-water recirculation: For residential buildings with a dedicated return line, single- and multi-family homes; Q-H performance is designed around duty points compensating for heat loss in a specific pipe layout.
  • Multiple heat sources: Compatible with all types of water heater tanks, tankless systems, solar or heat pumps, with or without mixing or tampering valves.
  • Selection tips: Check against rated flow 0.45 m³/h, rated head 0.9 m, maximum head 14 dm; confirm power supply 1 x 230 V / 50-60 Hz and connection Rp 1/2 inch (port-to-port 80 mm, PN 10); liquid temperature range 2 .. 95 °C and maximum operating pressure 10 bar.

FAQ

Q1: What type of pump is COMFORT 15-14 B TA?
A: It is a Grundfos COMFORT TA series adaptive high-efficiency domestic hot-water circulator (Product No. 98485557), designed for hot-water recirculation in residential buildings with a dedicated return line, compatible with water heater tanks, tankless systems, solar and heat pumps, with a drinking-water-approved brass housing.
Q2: What are the flow, head and power figures?
A: Rated flow 0.45 m³/h, rated head 0.9 m, maximum head 14 dm (the datasheet states the unit as decimeters). Maximum power input is only 7 W, speed no. 1, reducing heat loss by 67% versus a continuously running pump.
Q3: What control modes are available?
A: Three: AUTOADAPT (learns usage patterns, on-demand hot water, vacation mode and a weekly 15-minute anti-legionella disinfection cycle), temperature control (internal and external sensors, dynamically adjusted on/off temperatures, automatic vacation mode) and continuous 24/7 operation. The datasheet table lists only "Temperature" for operation modes; AUTOADAPT and 24/7 appear in the description text and are presented as such.
Q4: What about materials, liquid temperature and protection?
A: Brass pump housing (CuZn39Pb3, MS58) and composite impeller (PPO-GF20 / stainless steel); pumped liquid is water, liquid temperature range 2 .. 95 °C (selected 20 °C, density 998.2 kg/m³); enclosure class IP44, insulation class F, maximum operating pressure 10 bar.
Q5: What are the connection size, weight and origin?
A: Pipe connection standard ISO 228-1, connection type Rp, size 1/2 inch, pressure rating PN 10, port-to-port length 80 mm; net weight 1.14 kg, gross weight 1.24 kg, shipping volume 0.003 m³; sales region China, country of origin DE, custom tariff no. 84137099.90.
Source statement:Technical parameters and product information are taken from the official Grundfos English product datasheet for COMFORT 15-14 B TA (Product No. 98485557). All parameters follow that datasheet; for selection, installation and purchase, please refer to the latest official Grundfos technical documentation and actual operating conditions.

需要选型或采购「格兰富」水泵?欢迎联系

电话 15655120770
或邮件:pengry@qq.com(工作日快速回复)