Grundfos COMFORT 15-14 B TDT Time & Temperature Controlled DHW Circulator

COMFORT TDT Series | Product No. 93094769 | Single Product Focus
Source: Grundfos 93094769 COMFORT 15-14 B TDT Product Datasheet

Key Conclusion: What Is COMFORT 15-14 B TDT

Bottom line:Grundfos COMFORT 15-14 B TDT (Product No. 93094769, EAN 5715467694895) is a time and temperature controlled, high-efficiency circulator designed for hot-water recirculation in residential buildings with a dedicated return line. It is compatible with all types of water heater tanks, tankless systems, solar or heat pumps. Rated flow 0.45 m³/h, rated head 0.9 m, maximum head 14 dm, with a maximum power input of only 7 W. It uses timer control plus timer-and-temperature control, and reduces heat loss by 56% compared to a continuously running pump. The pump housing is drinking-water-approved brass; country of origin DK. All parameters are taken verbatim from the official Grundfos product datasheet, without any fabrication or inference.
Rated flow
0.45 m³/h
Rated head
0.9 m
Max head
14 dm
Max power input
7 W
Control
Timer + temp
Heat loss reduction
56%

Product Positioning and Control Logic

COMFORT TDT is an efficient circulator designed for hot-water recirculation in residential buildings with a dedicated return line. It is compatible with all types of water heater tanks, tankless systems, solar or heat pumps, whether or not the system has mixing or tampering valves installed. The pump features a compact housing and a permanent magnet with an integrated control unit. The spherical rotor, equipped with an impeller, is supported by a robust single-bearing ball system. The drinking-water-approved brass pump housing guarantees safety and reliability, and a built-in temperature sensor maintains precise water temperature. The user-friendly interface features LEDs and pushbuttons for displaying and setting operating times and control modes.

Timer Control Mode

The pump operates continuously based on set operating times, with the smallest time increment being 30 minutes. In case of power failure, the timer pauses (no power reserve), but the selected operating times and current time are retained. When power is restored, the pump resumes its last set operating state. If the power outage exceeds 15 minutes, the current time may need to be reset.

Timer and Temperature Control Mode (Time Priority)

The pump operates based on set operating times and the functionalities of temperature mode, with operating times taking priority — the temperature mode is only active during the specified operating times. This mode automatically activates the pump when the internal temperature sensor detects that the water temperature drops below a certain level. On/off temperatures are automatically adjusted based on the maximum temperature measured in the system; the maximum temperature is measured every 12 hours for 15 minutes, enabling dynamic adjustment of the on/off temperatures.

Variant and Optional Accessories

The BX variant includes non-return and shut-off valves, reducing installation cost. Optional: a venting flange (simple venting/draining without an additional permanent venting valve), fittings for pipe connections of different sizes and types, and non-return and shut-off valves.

Key Specifications (Product No. 93094769)

ItemCOMFORT 15-14 B TDT
Product nameCOMFORT 15-14 B TDT
Product No.93094769
EAN number5715467694895
Speed no.1
Rated flow0.45 m³/h
Rated head0.9 m
Maximum head14 dm
TF class95
ApprovalsVDE, CN_ROHS
Pump housingBrass (CuZn39Pb3, MS58)
ImpellerComposite (PPO-GF20 / Stainless steel)
Minimum ambient temperature0 °C
Maximum operating pressure10 bar
Pipe connection standardISO 228-1
Type of connectionRp
Size of connection1/2 inch
Pressure rating for connectionPN 10
Port-to-port length80 mm
Pumped liquidWater
Liquid temperature range2 .. 95 °C
Selected liquid temperature20 °C
Density998.2 kg/m³
Max. power input7 W
Mains frequency50/60 Hz
Rated voltage1 x 230 V
Current in speed 30.07 A
Enclosure class (IEC 34-5)IP44
Insulation class (IEC 85)F
Built-in motor protectionELECT.
Thermal protectionImpedance protected
Operation mode included (datasheet table)Timer (timer + temperature per description text)
Net weight / Gross weight0.94 kg / 1.04 kg
Shipping volume0.003 m³
Sales regionChina
Country of originDK
Custom tariff no.84137099.90

Note: Only items explicitly given in the official datasheet are listed. The datasheet table lists "Timer" under operation modes; the timer-and-temperature logic is described in the description text and presented accordingly. No values have been fabricated or inferred.

Key Features and Benefits

① Time and temperature control, 56% heat loss reduction

Timer mode operates on set times (smallest increment 30 minutes); timer+temperature mode starts on temperature within the set operating window. Compared to continuously running pumps, heat loss is reduced by 56%, with low power consumption and silent operation.

② Drinking-water-approved brass housing

Approved for drinking water: brass pump housing (CuZn39Pb3, MS58), stainless-steel rotor and composite impeller (PPO-GF20). Removing the pump head makes it easy to remove limescale and foreign deposits, meeting unlimited water hardness requirements.

③ Dry-running protection and multiple installation positions

Dry-running protection prevents failure if the system runs out of water. Multiple installation positions are supported, even with the pump head pointing downwards. The pump head fits brass housings of old and new pumps of the same design, including different manufacturers (Wilo, Vortex, Lowara, DAB, etc.).

④ Easy electrical installation and insulation

A pre-assembled power plug with a 1.5 m cable and double insulation protection eliminates the need for a ground wire. Insulating shells reduce heat loss, and the pump complies with pipe manufacturers' flow velocity limits (DN 15, DN 20 PEX, copper, etc.).

Applications and Selection Tips

  • Residential hot-water recirculation: For residential buildings with a dedicated return line, single- and multi-family homes; Q-H performance is designed around duty points compensating for heat loss in a specific pipe layout.
  • Multiple heat sources: Compatible with all types of water heater tanks, tankless systems, solar or heat pumps, with or without mixing or tampering valves.
  • Selection tips: Check against rated flow 0.45 m³/h, rated head 0.9 m, maximum head 14 dm; confirm power supply 1 x 230 V / 50-60 Hz and connection Rp 1/2 inch (port-to-port 80 mm, PN 10); liquid temperature range 2 .. 95 °C and maximum operating pressure 10 bar.

FAQ

Q1: What type of pump is COMFORT 15-14 B TDT?
A: It is a Grundfos COMFORT TDT series time and temperature controlled, high-efficiency DHW circulator (Product No. 93094769), designed for hot-water recirculation in residential buildings with a dedicated return line, compatible with water heater tanks, tankless systems, solar and heat pumps, with a drinking-water-approved brass housing.
Q2: What are the flow, head and power figures?
A: Rated flow 0.45 m³/h, rated head 0.9 m, maximum head 14 dm (the datasheet states the unit as decimeters). Maximum power input is only 7 W, speed no. 1, reducing heat loss by 56% versus a continuously running pump.
Q3: How do the control modes work?
A: Timer mode runs continuously on set times with a 30-minute minimum increment (times retained after power failure; current time may need resetting after an outage over 15 minutes). Timer + temperature mode gives operating times priority — temperature mode is active only within the set window; the internal sensor starts the pump when water temperature drops below a set level, with on/off temperatures dynamically adjusted from the system maximum temperature (measured every 12 hours for 15 minutes). The datasheet table lists "Timer"; the dual-control logic appears in the description text.
Q4: What about materials, liquid temperature and protection?
A: Brass pump housing (CuZn39Pb3, MS58) and composite impeller (PPO-GF20 / stainless steel); pumped liquid is water, liquid temperature range 2 .. 95 °C (selected 20 °C, density 998.2 kg/m³); enclosure class IP44, insulation class F, maximum operating pressure 10 bar.
Q5: What are the connection size, weight and origin?
A: Pipe connection standard ISO 228-1, connection type Rp, size 1/2 inch, pressure rating PN 10, port-to-port length 80 mm; net weight 0.94 kg, gross weight 1.04 kg, shipping volume 0.003 m³; sales region China, country of origin DK, custom tariff no. 84137099.90.
Source statement:Technical parameters and product information are taken from the official Grundfos English product datasheet for COMFORT 15-14 B TDT (Product No. 93094769). All parameters follow that datasheet; for selection, installation and purchase, please refer to the latest official Grundfos technical documentation and actual operating conditions.

需要选型或采购「格兰富」水泵?欢迎联系

电话 15655120770
或邮件:pengry@qq.com(工作日快速回复)